1-3/8" [35mm] DOORS ONLY USE 3/8" [9.5mm] 

OFFSET HANGERS

1-3/8" [35mm] OR 3/4" [19mm] DOORS

USE BOTH 1/16" [1.6mm] AND 3/8" [9.5mm] OFFSET HANGERS

2376 & 2378 HANGERS WILL REPLACE THE FOLLOWING HANGERS

NOTE: Hole patterns in the Johnson hanger will be different than the old hanger. Fill door holes with putty or Plastic-Wood and refinish as desired.

ACME

ALLIANCE

STANLEY

COX

CRAWFORD

ENDURA

ACME

ENDURA

DSH

COX

1832 REPLACEMENT TOP GUIDE

1. Check top track and pivots, replace if bent or damaged with Johnson 1700 Track and Hardware.

2. Remove door from opening.

3. Remove old guide from door.

4.Select proper pivot post, either 3/8" (smaller), or 7/16" (larger). Use same size pivot post as is currently in the door. Note: If smaller 3/8" pivot post does not fit snugly, drill a 7/16" hole and use larger pivot post.

5. Select proper head to fit track.

6. Firmly press new guide head onto new guide post on pivot.

7. Tap new guide, with proper head into hole in top door edge.

8. Rehang door.

FOR THESE TRACKS - USE 

JOHNSON 1800

ALLIANCE

ACME 2900

COX AND E-Z ROLL

NATIONAL

STERLING

ACME 2800

INSTRUCTIONS FOR INSTALLING UNIVERSAL SNUBBER IN FOLDING DOOR TRACKS

Select proper parts to fit your particular brand of folding door track. Two-door installations normally use short spring, four-door the long. (If too light, use 1-1/2" long spring for four doors). Snap spring into plastic retainer and press into track.

BROWN RETAINER 

Johnson 1400,

1700, 1800, 1850

Johnson 1825

ACME 2800

ALLIANCE

ACME 2900*

COX, E-Z ROLL

NATIONAL,

STERLING

Discard this part and the other part on the door and replace with Johnson 1832 Universal Pivot/Guide set.